T-Rex Crystal is a high quality, crystal clear, neutral, elastic, single component sealant/adhesive based on SMX®-Polymer.

Features and Benefits

• Crystal clear formulation
• Excellent adhesion on nearly all surfaces, even if slightly moist
• Very good mechanical characteristics
• Impervious to mould, contains ZnP (biocide with fungicidal action)
• Suitable for sanitary applications
• Ecological advantages – free of isocyanates, solvents, halogens and acids
• Minimal health and safety considerations
• Can be painted with water based paints and a number of other systems (preliminary test required)
• Food safe

Applications

• All interior and exterior bonding and sealing applications.
• Transparent and elastic bonding in many different construction and building applications.
• Interior bonding of glass and other transparent materials (cannot be used as a glazing sealant)

T-Rex Power Fast Grab is a high quality, neutral, elastic, 1-component adhesive sealant based on SMX®  Polymer with a very high initial tack. T-Rex Power Fast Grab is a high strength sealant / adhesive that can hold 320kg’s per 10cm2 with a 1 Second immediate grab

Features and Benefits

• Fast grab reducing the need for initial support
• Fast curing
• Good extrudability
• High shear strength after full cure (no primer)
• Stays elastic after curing and very sustainable
• No odour
• Can be painted with water based systems
• Good weather and UV resistance
• Does not contain isocyanates and no silicones
• Good adhesion on slightly moist substrates
• Water potable

Applications

• Sealing and bonding in the building and construction industry
• Elastic bonding of panels, profiles and other pieces on the most common substrates (wood, MDF, chipboard, etc)
• Elastic structural bonding in car and container industry

Materials

Soudal T-Rex Power has an excellent adhesion on almost all substrates. Soudal T-Rex Power has been tested on the following metal surfaces: steel, AlMgSi1, brass, electrolytic galvanised steel, AlCuMg1, flame galvanised steel, AlMg3 and steel ST1403. Plastics that were tested include: polystyrene, polycarbonate (Makrolon®), PVC, polyamide, glass fibre reinforced epoxy and polyester (GRP).

Due to the fact that specific substrates such as plastics, like polycarbonate, etc, may differ from manufacturer to manufacturer, we recommend preliminary compatibility test

Bostik 1465 Duct Sealant is a fire rated product supplied in 300ml cartridges for sealing high velocity air conditioning ductwork.

• Fire-rated
• Fast setting/drying (within 30 minutes)
• Excellent adhesive to most materials
• Very long lasting
• Internal/external applications
• Flexible
• Paintable
• Completely weatherproof when cured
• Good chemical resistance

Applications

• General air conditioning and ductwork sealing
• Sealing metal sheeting
• Suitable for heating/cooling application
• High velocity duct work
• Use in truck and trailer sealing
• Setting and sealing aluminium window frames

Bostik Seal ‘N’ Flex® Auto & Marine FC is a high performance, fast cure polyurethane adhesive/sealant. Bostik Seal ‘N’ Flex® Auto & Marine FC exhibits exceptional adhesion capabilities and is suitable for a wide range of industrial and automotive adhesion applications for internal and external uses.

• Fast tack free time and cure speed
• Excellent adhesion and sealing properties
• Good chemical resistance
• Excellent water resistance
• Paintable
• May be used in contact with both sea and fresh water
• Excellent resistance to weathering and aging
• Exceptional noise vibration and impact dampening characteristics
• Internal and external application
• Slump resistant
• Resistant to fungal attack

Applications

• Automotive structural adhesive in bus, truck and industrial vehicle assembly
• Marine commercial and pleasure craft
• Air-conditioning and refrigeration industrial and commercial applications
• Metal working, joining and sealing metal panels storage vessels, heavy shipping container vessels requiring sealing or panel installation
• General industrial and maintenance
• For bonding sheet metal, aluminium, stainless steel, ABS, GRP, Injection moulding PU and PVC as well as timber
• Mining applications where sealing of cavities (joints) and adhering panels

Bostik 40-317 High Velocity Acrylic Duct Sealant is designed for use on both low and high velocity heating and air conditioning ducts. It forms a tough, yet flexible seal, which prevents loss of internal pressure without the necessity of additional tape. It is both waterproof and flame retardant and has excellent adhesion to metal surfaces.

Substrates

• Heating Units
• Air conditioning Units

Materials

• Metal

• Best for the preparation of glass for windscreen bonding
• Primes and cleans non-porous surfaces in one action

Use with

• Bostik Seal ‘N’ Flex® 1
• Bostik Seal ‘N’ Flex® FC
• Bostik Fireban® One
• Bostik Matrix® FC

Recommended uses

• Interior and exterior applications
• Residential and Commercial projects
• Best for rigid metals and PVC plastics

A Powerful heavy duty, trade quality sausage. Comes with aluminium and clear plastic interchangeable barrels.

Features and Benefits

• Heavy duty and strong
• Smooth operation
• Large handle and trigger
• Option of clear plastic or aluminium barrel
• Dispenses all sausages

Recommended Uses

• Applicator gun for 600ml sausage

A trade quality strong and durable skeleton gun for dispensing all cartridge based products. Featuring Soudal Dripless System which reduces mess and product waste.

Features and Benefits

• Strong, robust and lightweight
• Dripless system automatically releases pressure
• Contoured Trigger
• Powder coated for longevity
• Dispenses all cartridges

Recommended Uses

• Applicator gun for 300 ml cartridge sealants

Heavy duty trade quality gun

Features and Benefits

• Applicator gun for 380mL Chemical Anchor cartridge
• Smooth operation

Recommended Uses

• Applicator gun for 380 ml Chemical Anchor cartridge

Bostik PVC Priming Fluid is a solvent based fluid formulated for cleaning and priming of PVC pipes and fittings prior to application of Bostik PVC Solvent Cements.

• WaterMark certified as per the Plumbing Code of Australia
• Conforms to requirements specified in AS/NZS 3879 when used in conjunction with Bostik PVC Pipe cement Type N & Type P solvent cements
• Suitable for water potable applications – meets AS/NZS 4020
• Unique, easy to use ‘dauber’ applicator included in cap (1L and under)
• Colour coded packaging for easy product selection
• Ready for use – no mixing required
• Good application viscosity; easily applied with minimal dripping

Recommended Uses

• Use prior to application of both Type N & Type P Bostik PVC Pipe Cements